Based on the Red Seal Automotive Refinishing Technician exam blueprint: surface preparation, colour matching, spray equipment, application and safety
Practice on the go and jump straight back to where you left off.
About the certification
In Ontario, Automotive Painter is trade code 410N, a non-compulsory trade of about 4,800 hours (4,560 on the job and 240 in school) regulated by Skilled Trades Ontario. Across Canada it is the Red Seal trade Automotive Refinishing Technician, so passing the Certificate of Qualification exam also earns the interprovincial Red Seal endorsement.
The Red Seal exam has 120 multiple-choice questions in three major work activities: common occupational skills (20), preparation (50) and refinishing procedures (50). About 35 to 45% of questions test recall, 45 to 55% procedure and application, and under 10% critical thinking. The Red Seal self-assessment guide states a 70% passing mark; no time limit is published.
ExamHub's free 410N practice quiz has 210 original questions weighted to the real exam tasks, with an explanation and a source for every answer.
What's covered
Categories follow the 10 Red Seal exam tasks, weighted like the real exam.
Try a few
Five sample questions from the question bank, with the answer and explanation.
Why: Ontario requires a Type C airline respirator with a full facepiece, hood or loose-fitting visor in positive-pressure mode, or a full-facepiece SCBA in positive-pressure mode. Half-mask supplied-air and organic vapour cartridge respirators do not give adequate protection.
Why: Excess primer surfacer and filler are removed by guide coating and block sanding with the cross-hatch method until a level surface is achieved.
Why: Metamerism is a colour shift when viewed under different light sources. It is why colour is checked in natural light or with colour-corrective lighting.
Why: Mottling and striping are basecoat defects tied to uneven flake orientation. A drop/orientation coat, applied according to job requirements and the TDS, controls the metallic.
Why: Water is listed among the contaminants that can ruin clear. Compressed air dryers and moisture traps must be inspected, cleaned and verified so water does not reach the gun.
FAQ
The Red Seal Automotive Refinishing Technician exam has 120 multiple-choice questions, each with four options. ExamHub's bank has 210 questions, and Test Mode draws a full 120-question timed simulation.
The Red Seal self-assessment guide states a passing mark of 70%, and ExamHub's Test Mode uses 70%. The Red Seal exam page publishes no time limit; Test Mode allows up to 3 hours (an ExamHub setting).
Three major work activities: common occupational skills (20 questions: safety 4, tools and equipment 8, work organization 6, communication and mentoring 2), preparation (50: surface preparation 32, repair materials 18) and refinishing procedures (50: equipment 8, materials and colour 14, application 20, post-refinishing 8).
Skilled Trades Ontario lists about 4,800 hours: 4,560 on the job and 240 in school. 410N is a non-compulsory trade, and passing the exam also earns the Red Seal endorsement.
No. These are original practice questions written from the Red Seal standard and free official sources. They are not copies of exam questions.